concrete
Weibach2 – Impact of people and objects
art, artwork, Oliver Neumann, Kunst, mixed media, light, ai, interactive, unique, generative, contemporary, abstract, sculpture, objects, impact, people
-1
archive,tag,tag-concrete,tag-41,qode-social-login-1.1.3,qode-restaurant-1.1.1,stockholm-core-1.2.1,select-theme-ver-5.2.1,ajax_fade,page_not_loaded,wpb-js-composer js-comp-ver-6.1,vc_responsive
Liberation 1 - Stone controlled light - Weibach2

Liberation 1 – Mixed Media Table Lamp (Stone Controlled Light)

Liberation 1 is stone controlled LED light. With a specific made stone you can dim the light as well as change the color temperature from cold white to warm white. Inside is an Arduino Nano to get the magic work.

Height / Höhe: 25 cm
Width / Breite: 23 cm
Depth / Tiefe: 23 cm

Material: Plexiglas, concrete, paper, wire, Arduino Nano, LED / Plexiglas, Beton, Papier, Draht, Arduino Nano, LED

 

Liberation 1 ist ein per Stein kontrollierbares LED Licht. Mit einem speziellen Stein kann man sowohl die Helligkeit als auch die Lichttemperatur der Lampe, von Kaltweiß zu Warmweiß, verändern. Technisch möglich macht dies ein Arduino Nano Microcontroller.

Name Sign Sculpture / Namesschild Skulptur - Weibach2 - Oliver Neumann

Object 181019 – Name Sign Sculpture / Namensschild Skulptur

Height / Höhe: 160 cm
Width / Breite: 55 cm
Depth / Tiefe: 12 cm
Weight / Gewicht: roughly 50 kg

Material: Glass fiber concrete, Jackoboard, adhesive mortar, pigments, water glass (sodium silicate), dual color plexiglas, LED technology
Glasfaserbeton, Jackoboard, Klebemörtel, Pigmente, Wasserglas, Dual Color Plexiglas, LED Technologie

  Commission / Auftragsarbeit  

Concrete Surface 2 - Beton-Struktur 2 - Weibach2

Concrete Surface 2 / Beton-Struktur 2

Height / Höhe: 60 cm
Width / Breite: 40cm
Depth / Tiefe: 2 cm
Weight / Gewicht: 1,9 kg
Material: Jackoboard, adhesive mortar, pigments, steel wool, water glass (sodium silicate) / Jackoboard, Klebemörtel, Pigmente, Stahlwolle, Wasserglas


Construction:

  • Adhesive mortar (about 0.5 cm thick) on a Jackoboard (construction board made of water-repellent, heat-insulating XPS material).
  • Surface design with spatula and brush.
  • Portland cement applied with steel wool in the middle.
  • Several sanding passes.


Color design:

Water glass (mixed with concrete pigments) applied with a rag.


Remarks:

This object is unique. Dimensions and weight are approximate.

Aufbau:

  • Klebenmörtel (ca. 0,5 cm dick) auf Jackoboard (Bauplatte aus wasserabweisendem, wärmedämmendem XPS-Material).
  • Oberflächengestaltung mit Spachtel und Pinsel.
  • Portlandzement mit Stahlwolle mittig aufgetragen.
  • Mehrere Schleifdurchgänge.


Farbliche Gestaltung:

Wasserglas (mit Beton-Pigmenten versetzt) mit einem Lappen aufgetragen.


Bemerkungen:

Es handelt sich bei diesem Objekt um ein Unikat.
Angaben zu Abmessungen und Gewicht sind ungefähre Angaben.

 

Concrete Surface 1 - Beton-Struktur 1 - Weibach2

Concrete Surface 1 / Beton-Struktur 1

Height / Höhe: 59,5 cm
Width / Breite: 42,5 cm
Depth / Tiefe: 2 cm
Weight / Gewicht: 1,5 kg
Material: Jackoboard, adhesive mortar, acid stain, pigments, water glass (sodium silicate) / Jackoboard, Klebemörtel, Betonbeize, Pigmente, Wasserglas

Buy on Etsy / Auf Etsy kaufen

The support body of this object is made of Jackoboard (building board made of water-repellent, heat-insulating XPS material). This was covered with a special adhesive mortar, about 0.5 cm thick. The mortar was then sculpted with spatula and brush. After the adhesive mortar had dried, it was colored with concrete pigments and water glass (sodium silicate) paint. In between, the sharp edges of the surface structure were partially sanded to restore their original color. Finally, beige-brown acid stain was applied.

The materials used are weather resistant and frost resistant according to the manufacturer. This concrete object can therefore be hung or placed outdoors.

This object is unique.
Dimensions and weight are approximate.

Auf ein ca. 42 x 60 cm großes Jackoboard (Bauplatte aus wasserabweisendem, wärmedämmendem XPS-Material) wurde ein spezieller Klebemörtel, ca. 0,5 cm dick, aufgetragen. Der Mörtel wurde anschließend mit Spachtel und Pinsel gestaltet. Nach dem Trocknen des Klebemörtels wurde dieser mit Farbe aus Beton-Pigmenten und Wasserglas farblich gestaltet. Zwischendurch wurden die scharfen Kanten der Oberflächenstruktur teilweise abgeschliffen um ihre ursprüngliche Farbe wieder zum Vorschein zu bringen. Zum Schluß wurde stellenweise eine beige-braune Beton-Beize aufgetragen.

Die verwendeten Materialien sind laut Hersteller witterungsbeständig und frostfest. Das Beton-Bild kann also auch im Freien aufgehängt bzw. aufgestellt werden.

Es handelt sich bei diesem Objekt um ein Unikat.
Angaben zu Abmessungen und Gewicht sind ungefähre Angaben.

Concrete Sculpture 2 / Beton-Plastik 2 - Weibach2

Concrete Sculpture 2 – Beton-Plastik 2

Height: 168 cm / 41 cm
Width: 45 cm / 42 cm
Depth: 28 cm / 26 cm
Weight: roughly 60 kg
Material: Glass fiber concrete, Styrofoam, rebar, adhesive mortar, pigments, acid stain, water glass (sodium silicate)

If you are interested in these two sculptures, please contact me via e-mail.

For the construction of this sculpture, a support body made of Styrofoam was made first. The Styrofoam body was then reinforced with a light rebar structure. Support body and rebar structure were then covered with a layer of glass fiber concrete about 1 cm thick. Subsequently, the glass fiber concrete was sanded. To achieve the final surface structure of the sculpture, a special adhesive mortar was applied and sculpted with spatula, brush and cling film. Subsequently different layers of colored water glass (sodium silicate) were applied. In between, the concrete sculpture was sanded again. Finally, the sculpture was treated with acid stain here and there.

According to the manufacturers of the materials used, the concrete sculpture is weather-resistant and frost-resistant. Also in terms of color, no major changes are expected.

These objects are unique.
Dimensions and weight are approximate.

Wood Concrete Design Object 1 / Holz Beton Design Objekt 1 / Weibach2 / Oliver Neumann

Wood Concrete Design Object 1 / Holz Beton Design Objekt 1

Height / Höhe: 32 cm
Width / Breite: 14,5 cm
Depth / Tiefe: 12 cm
Weight / Gewicht: 0,81 kg
Material: wood, concrete / Holz, Beton

  SOLD – Naples (Florida, USA)

This wood-concrete object consists mainly of Spanish cedar. It was first roughly shaped, then smoothed. The wood was brushed out with different wire brushes. The dark surface was created by staining and sanding. As a finish, Danish Oil was used. The turquoise drop as well as the base consists of concrete and were also stained, sanded and painted with acrylic paint. 

Dieses Holz-Beton Objekt besteht hauptsächlich aus spanischer Zeder. Diese wurde erst grob in Form geflext, dann glattgeschliffen. Anschließend wurde das Holz mit verschiedenen Drahtbürsten ausgebürstet. Die dunkle Oberfläche entstand durch mehrfaches Beizen und Schleifen. Als Finish wurde Danish Oil verwendet. Der türkis-farbene Tropfen besteht aus Beton und wurde ebenfalls gebeizt, geschliffen und mit Acrylfarbe stellenweise bemalt. Auch der Sockel ist aus Beton, mehrfach geschliffen, gebeizt und teilweise mit Acrylfarbe versehen.

Earth - Concrete Design Object / Beton Design Objekt / Weibach2 / Oliver Neumann

Earth – Concrete Design Object / Beton Design Objekt

Height/Höhe: 24,5 cm
Width/Breite: 18 cm
Depth/Tiefe: 12 cm
Weight/Gewicht: 2,84 kg
Material: fiberglass concrete, concrete, steel wool / Glasfaserbeton, Beton, Stahlwolle

Buy on Etsy / Auf Etsy kaufen

This concrete object leaves much room for interpretation. It is a, for me, experimental piece.  First a layer of glass fiber reinforced concrete was apllied on a support body. This was then wrapped with wire and covered with a sand-cement mix. The outer layer is made of cement and fine steel wool. In several passes, the abstract object was finally stained, sanded and polished.
The base is made of stained spruce wood and oiled twice with Danish Oil.

Dieses Objekt aus Beton lässt viel Raum für Interpretationen. Es handelt sich um ein, für mich, experiementelles Stück. Auf einen Stützkörper wurde erst eine Schicht Glasfaserbeton aufgetragen. Dieser wurde dann mit Draht umwickelt und mit einen Sand-Zement Mix abgedeckt. Die äußere Schicht besteht aus Zement und feiner Stahlwolle. In mehreren Durchgängen wurde das abstrakte Objekt schließlich gebeizt, geschliffen und poliert.
Der Sockel besteht aus gebeiztem Fichtenholz und wurde mit Danish Oil zweifach geölt.

The Rise - Weibach2 - Concrete sculpture

The Rise – Concrete Sculpture / Beton Plastik

120 cm, ca. 60 kg.
Glasfaserbeton, Feinschichtmörtel, Pigmente.
Fehler: Zu tief im Sockel, Trägerkörper zu groß (Proportionen stimmen nicht).
Im Frühjahr kommt sie ins Freie.

120 cm, about 60 kg.
Glass fiber concrete, fine-layer mortar, pigments.
Mistakes: too low in the pedestal, carrier too big (wrong proportions).
In spring it goes outside.

Concrete Design Object 2 / Beton Design Objekt 2 / Weibach2 / Oliver Neumann

Concrete Design Object 2 / Beton Design Objekt 2

Weight/Gewicht: 6,5 kg
Height/Höhe: 35 cm
Width/Breite: 26 cm
Depth/Tiefe: 13 cm
Material: Glass fiber concrete / Glasfaserbeton, Beton

  SOLD – Twin Peaks (California, USA) 

This object consists of two styrofoam support bodies that have been coated with glass fiber reinforced concrete. The outer layer consists of fine-layer mortar mixed with pigments. The two concrete parts are connected with a special concrete adhesive mortar. Finally, the outer concrete layer was stained and sanded several times. A small stone is used to hold the sculpture upright (as often in life).

Dieses Objekt besteht aus zwei Styropor-Stützkörpern die mit Glasfaserbeton beschichtet wurden. Die Aussenschicht besteht aus, mit Pigmenten vermischtem, Feinschichtmörtel. Die beiden Betonteile sind mit einem speziellen Beton-Klebemörtel verbunden. Abschließend wurde die äußere Betonschicht mehrfach gebeizt und geschliffen. Um das Ganze aufrecht zu erhalten dient ein kleiner Stein (wie so oft im Leben).

Concrete Design Object 1 / Beton Design Objekt 1 / Weibach2 / Oliver Neumann

Concrete Design Object 1 / Beton Design Objekt 1

Weight/Gewicht: 8 kg
Height/Höhe: 35,5 cm
Width/Breite: 26 cm
Depth/Tiefe: 15 cm
Material: Glass fiber concrete, fine-layer mortar, pigments / Glasfaserbeton, Feinschichtmörtel, Pigmente

  SOLD – Long Island City (New York, USA) 

This object consists of two styrofoam bodies covered with glass fiber concrete. Subsequently, a layer of fine-layer mortar mixed with colored pigments was applied.

Dieses Objekt besteht aus zwei Styroporkörpern die mit Glasfaserbeton überzogen wurden. Anschließend wurde eine Schicht Feinschichtmörtel aufgetragen. Dieser wurde zuvor mit farbigen Pigmenten vermischt.

Blue Square - Acrylic Concrete Painting / Acryl-Beton Bild / Weibach2 / Oliver Neumann

Blue Square – Acrylic paint on canvas and concrete / Acrylfarbe auf Leinwand und Beton

Weight/Gewicht: 0,65 kg
Height/Höhe: 40 cm
Width/Breite: 42,5 cm
Depth/Tiefe: 4 cm
Material: Acrylic paint on canvas and concrete / Acrylfarbe auf Leinwand und Beton

  SOLD – Cham (Switzerland) 

The blue square is made of concrete on a tailored Jackoboard. The concrete was painted with acrylic paint.

Das blaue Quadrat ist zugeschnittenes Jackoboard auf das Beton aufgetragen wurde. Anschließend wurde der Beton mit Acrylfarbe bemalt.

Wood Concrete Clock / Holz-Beton Uhr / Weibach2 / Oliver Neumann

Wood Concrete Clock / Holz-Beton Uhr

Weight/Gewicht: 0,63 kg
Height/Höhe: 13 cm
Width/Breite: 18 cm
Depth/Tiefe: 6,5 cm
Material: Spruce wood, unknown scrap wood / Fichtenholz und unbekannte Resthölzer

  SOLD – Montreal (Canada) 

The dial is made of concrete. Embedded in the concrete is a stone from the river Eder (Germany). The clock is completely bolted. The clockwork can therefore be replaced. To change the battery, the two rear screws have to be loosened. The back wood panel was stained. As a finish, a high-quality furniture lacquer was used.

Das Uhrenblatt ist aus Beton. In diesen Beton ist ein Stein aus der Eder eingelassen. Die Uhr ist komplett verschraubt. Das Uhrenwerk kann also ausgewechselt werden. Für den Batteriewechsel müssen ebenfalls die zwei Schrauben des hinteren Holzstückes gelöst werden. Das hintere Holzstück wurde gebeizt. Als Finish wurde ein hochwertiger Möbellack verwendet.

WEIBACH2 / Der fertige Beton-Fels / the finished concrete rock

Beton-Fels / Concrete rock

Vier Test-Findlingen, nun kleine Felsformation aus Beton. Gelbe Pigmente. Sandstein-Look. Geschnitzt, bekratzt und abgepinselt.

Four test boulders, now small concrete rock formation. Yellow pigments. Sandstone look. Carved, scratched and brushed.

Holz-Beton-Sofa - Weibach2

Beton-Holz-Sofa / Concrete-wood sofa

Zweites selbstgebautes Sofa. Aus Holz, Beton und kleinen Fehlern. Neue Erfahrungen. Man kann drauf sitzen.

Second home made sofa. Made of wood, concrete and small mistakes. New experience. You can sit on it.

 

Weibach2 - Blumen-Kugel / Flower Ball

Blumen-Kugel / Flower Ball

Beton, Glasfaser, Gummiball, Pigmente. Erste Gehversuche.
Concrete, fiberglass, rubber ball, pigments. First steps.

WEIBACH2 - Holz-Beton Uhr / Wood-Concrete Clock

Holz-Beton Uhr 1 / Wood-Concrete Clock 1